TPE injection molding, Dongguan
Red Dildos Made to Your Color Standard: TPE Production for B2B Buyers
We are a TPE injection molding factory in Dongguan, Guangdong. We produce red dildos for brands, distributors, and retailers that need a specific shade, consistent color across reorders, and paperwork their target markets will accept. We handle red TPE production in-house, including the process steps that affect your cost and timeline, and we quote once you send the specs we need.
- Custom red shades matched to your reference
- No MOQ on standard products
- CE, RoHS, REACH, POPs documents on request
What a Red TPE Dildo Involves
TPE (thermoplastic elastomer) is the base material for most of our soft-touch products. It is injected into steel molds, cooled, demolded, then trimmed and packed. The material stays flexible without vulcanization, which keeps the process fast and repeatable.
Red is one of the harder colors to run consistently. Pigment load, base material lot, and cooling conditions all shift the final shade. A red that looks right on a screen can read as orange or brown on a finished part. That is why we treat color as a controlled variable from the first sample, not something we adjust at the end.
How We Match and Hold a Red Shade
We start from the reference you give us: a Pantone chip, a physical part, or a brand swatch. We mix test batches with colorant at several loadings, mold sample pieces, and compare them under the same light source you will use for approval. Once you sign off a shade, we record the colorant ratio and processing parameters for that SKU so the next order starts from the same recipe.
Step 1
Reference intake
Pantone chip, physical part, or brand swatch received and logged.
Step 2
Test batches
Colorant mixed at several loadings and molded into sample pieces.
Step 3
Light-matched approval
Samples compared under the same light source you will use for sign-off.
Step 4
Recipe locked per SKU
Colorant ratio and processing parameters recorded for every reorder.
What this means for you: Reorders match your approved sample, so your retail listing photos, packaging, and product do not drift apart after the second or third batch.
For color-critical runs we use virgin TPE rather than blends that include recycled material. Recycled content can introduce yellowing or uneven tone, so we keep it out of red lots where color matching matters. Runner recycling still happens on non-critical production, which keeps the material cost reasonable without affecting the appearance of your product.
Our Production Line for Color and Volume Runs
We run the full chain in one building, which removes the handoffs that cause delays and color drift between suppliers. Our injection molding workshop covers about 900 m² and the whole site is about 1,800 m². That space lets us hold mold sets, run trial lots, and keep reorder stock on hand without moving product between locations.
- Injection molding machines
- 10
- Material mixers
- 3
- Factory area (m²)
- 1800
- Injection workshop (m²)
- 900
- Material mixing: 3 mixers prepare colorant and base compound for each lot.
- Injection molding: 10 machines run in parallel, so a large red order does not depend on one machine's schedule.
- Mold making and repair: 1 mold-making machine and 2 EDM machines handle cavity work, mold correction, and repairs.
- Machining and finishing: 1 lathe supports parts that need precise dimensions or assembly fits.
- Packaging and warehousing: Standard or private-label packaging runs in-house, and finished stock moves straight to the warehouse.
What this means for you: You work with one production team from the first mold to the packed carton. When a shade or hardness needs adjusting, the person who controls the mixing and the molding is the same person who sees the problem.
Sampling, Trials, and Mold Development
Every new red design goes through the same sequence. Trial molding is where we check shade, hardness, flash, and wall thickness before you commit to a full order.
- 01
3D review
- 02
Mold making
- 03
Polishing
- 04
Trial molding
- 05
Sample approval
- 06
Mass production
Existing catalog designs
Sampling is short and reorders can ship in about 1–3 days.
New molds
We review the structure and order quantity first, then give you a timeline. Simple structures move quickly. Undercuts, multiple colors, or tight tolerances take longer and cost more to tool, and we tell you that before cutting steel.
What this means for you: You see the cost of a new mold before you pay for it, and you can decide whether to start with a stock design while the custom tool is being built.
Specifications at a Glance
| Parameter | Specification |
|---|---|
| Base material | TPE (virgin material recommended for color-critical red lots) |
| Color | Red in custom shades; matched to Pantone chip, physical part, or brand swatch |
| Hardness | Adjustable within the TPE range; final value confirmed in sampling |
| Mold source | Customer drawings or in-house 3D design |
| Trial molding | Included before mass production |
| Minimum order quantity | No MOQ |
| Stock / reorder shipping | Approximately 1–3 days |
| New mold lead time | Evaluated per structure and order volume |
| Packaging | Standard or private-label, with custom instruction manual |
| Compliance documents | CE, RoHS, REACH, POPs (documents available on request) |
| Equipment | 10 injection molding machines, 2 EDM machines, 1 mold-making machine, 1 lathe, 3 mixers, 3 shredders |
| Factory area | Approx. 1,800 m² (injection workshop approx. 900 m²) |
| Location | Dongguan, Guangdong, China |
Choosing a Red Product Route for Your Project
The right route depends on what you are selling and how quickly you need stock.
Launching a new brand
Start with a stock red design in a small trial lot. This tests the market and the color before you pay for a custom mold. Once a design sells, we can build a custom red version or adjust hardness based on feedback.
Selling on Amazon, Shopify, or TikTok Shop
Use a standard red design with private-label packaging and a unique color shade. Listings look different from common red products on the marketplace, and the packaging supports your brand instead of a generic box.
Supplying distributors or importers
Set up a repeat-order schedule with a fixed shade and packaging spec. Batch consistency matters more than a low unit price, because a mismatched lot creates returns and account problems.
Developing a new red shape
Share the structure, target size, and intended feel. We will tell you whether it is manufacturable as drawn, what changes would reduce mold cost, and whether a rapid prototype or direct mold makes more sense.
Compliance Documents for Europe and the United States
Buyers in Europe and the United States usually ask for documentation before listing a product. We can provide CE, RoHS, REACH, and POPs documents for the materials used in our products.
Please confirm the exact requirements for your market and sales channel with your own compliance advisor, since regulations and retailer demands differ.
Documents we can supply
- CE
- RoHS
- REACH
- POPs
Send the document list your buyer requires with your RFQ, and we will confirm which documents we can supply for your specific SKU and material.
Frequently asked questions
How to Send an RFQ and What You Receive
To return a useful quote, we need the following:
- Product type and quantity: Stock design or custom, and your first order volume.
- Color reference: Pantone number, physical sample, or photo under known lighting.
- Hardness and feel: Soft, medium, or firm, or a reference product.
- Packaging: Standard, private-label, or custom box with dimensions.
- Target market and compliance needs: Europe, United States, or other, plus required documents.
- Timeline: Target launch date and whether you need a sample first.
We return a quote with unit price, sampling cost, mold cost if applicable, production lead time, and the documents we can supply. If a new mold is needed, the tooling estimate is sent separately so you can review it before committing.
Request a quote
We respond to project inquiries from B2B buyers, distributors, and sourcing partners.
- Phone
- Office